Products
Iron Doors and Windows
Iron doors and windows form a major part of our work at Dhiman Welding Works, chosen by clients who want a combination of strength, security, and long-term durability. Iron as a material has been trusted for generations in home construction because it holds up well against daily wear, resists forced entry far better than lighter materials, and can be shaped into a wide range of designs without losing structural integrity.
Our iron doors are built for main entrances, side entrances, and internal partitions where extra security is needed, such as store rooms or ground-floor access points. We measure the exact opening at your property before fabrication begins, so the finished door fits precisely without gaps that could compromise security or let in dust and insects.
Iron windows, similarly, are fabricated to match your existing window openings, whether you are constructing a new property or replacing old, worn-out frames. We pay close attention to the balance between security and ventilation — an iron window should protect the home without making a room feel closed in or dark. Our designs range from simple straight-bar patterns, which are practical and cost-effective, to more decorative styles for clients who want their windows to add to the visual character of the property.
Steel Gates
Steel gates are one of our most requested products, particularly from clients who need a gate that can handle heavy daily use without warping, sagging, or weakening over time. Steel is a preferred material for gates because of its strength-to-weight ratio and its ability to be welded into large spans without losing rigidity.
We fabricate steel gates for residential main entrances, farmhouse driveways, and commercial or industrial properties such as warehouses and factories. For homes, we focus on a good balance between strength and appearance, often incorporating design elements that suit the style of the house. For commercial and industrial clients, the priority usually shifts toward maximum strength and security, though we remain open to adding design elements on request even for these larger gates.
Every steel gate is finished with proper priming and painting before it leaves our workshop, so that it holds up well against Punjab’s weather conditions — from monsoon humidity to summer heat — without rusting or losing its finish prematurely.
Iron Gates
Alongside our steel gate work, we also fabricate gates in iron, a material long associated with traditional gate-making in this region. Iron gates are especially popular among clients who want a design that carries a slightly more classic or ornamental look, without compromising on strength.
We make iron gates in a wide range of styles — from simple, functional single or double-leaf gates for smaller homes, to larger, more elaborate designs for farmhouses and independent properties where the gate also serves as a statement piece for the entrance. Whatever the design, the underlying fabrication follows the same principle: every joint is welded to hold up under years of daily opening and closing, exposure to weather, and general wear.
Sliding Iron and Steel Gates
Not every property has the space for a traditional swinging gate, and not every client wants one. For these situations, we fabricate sliding gates in both iron and steel, designed to move smoothly along their track without jamming, sagging, or requiring constant adjustment.
Sliding gates are particularly useful for properties with narrow driveways, gates that open onto a road or lane with limited clearance, or commercial properties where a swinging gate would be impractical for vehicle movement. We build the supporting frame and track system carefully, since a sliding gate depends as much on precise alignment and quality hardware as it does on the strength of the gate itself. Our team ensures that the gate operates smoothly from day one and continues to do so with basic, ordinary maintenance over the years.
Aluminium Doors and Windows
For clients looking for a lighter, low-maintenance alternative to iron and steel, we also fabricate aluminium doors and windows. Aluminium does not rust the way iron and steel can, requires very little upkeep, and is easier to operate for larger sliding doors and windows due to its lighter weight.
Aluminium doors and windows are a popular choice for modern homes, shops, and commercial spaces where a cleaner, more contemporary look is preferred, or where the client wants to avoid the periodic repainting that iron and steel products may need over time. As with all our products, aluminium doors and windows are made to the exact measurements of your property, ensuring a smooth, properly aligned fit.
Door and Window Frames, Railings, and Staircase (Paudi) Work
Beyond doors, windows, and gates, we also fabricate door and window frames, railings, and staircase railings — locally known as paudi — using Japani and Tata brand stamped sheets, worked entirely in iron. These branded stamped sheets are chosen specifically for their consistency and reliability as a raw material, ensuring that every frame or railing we produce meets the same dependable standard.
Door and window frames form the base structure into which the door or window itself is fitted, and their quality directly affects how well the final unit performs — a poorly made frame can lead to misalignment, gaps, or a door and window that doesn’t sit or operate correctly. We take the same care with frame fabrication as we do with the doors, windows, and gates themselves.
Our railing and staircase (paudi) work follows the same standard. Staircase railings need to be strong, properly anchored, and safe for daily use, while also fitting the overall look of the property. Using Japani and Tata stamped sheets for this work allows us to maintain a dependable level of quality across every railing and staircase project we take on.
